This seems just right. (This same zombie killed a sunflower later. Proud of him)

2022.01.20 01:09 Spritenix This seems just right. (This same zombie killed a sunflower later. Proud of him)

This seems just right. (This same zombie killed a sunflower later. Proud of him) submitted by Spritenix to PvZGardenWarfare [link] [comments]


2022.01.20 01:09 RaptusR3galit3r [Ps4] Have scorchbeast Queen plushie Plan W: Flux and junk, Rare apparel or Plans

submitted by RaptusR3galit3r to Fallout76Marketplace [link] [comments]


2022.01.20 01:09 LeminSqueezy Kimchi-jjigae: our first attempt, definitely not out last attempt 😍🥰

Kimchi-jjigae: our first attempt, definitely not out last attempt 😍🥰 submitted by LeminSqueezy to vegetarianrecipes [link] [comments]


2022.01.20 01:09 imalurkeeeer I’ve been single for almost five years after an abusive relationship and was focused on healing and self-discovery, and as days passes by I’m realizing that I’m actually easy to be with, because I’m contented on my own and I don’t crave outside validation like I used to👌

I’ve been single for almost five years after an abusive relationship and was focused on healing and self-discovery, and as days passes by I’m realizing that I’m actually easy to be with, because I’m contented on my own and I don’t crave outside validation like I used to👌 submitted by imalurkeeeer to AlasFeels [link] [comments]


2022.01.20 01:09 gojiraaltforreasons Nest Hub stuck in 'Your Evening' doesn't go back to photo frame or clock.

Started happening this week. Photo frame or clock works fine during the day. It also does its 'proximity sensing' thing where if you walk past it during the day, it will show 'Your Morning' etc, but then it will go back to photo frame/clock.
But recently this week, once it decides to show 'Your Evening', it never goes back. Not only is it annoying and ugly, I'm worried about burn-in.
Proximity sensing is On, quick gestures Off. Tried a reboot, which works if you're out of range, but will eventually flip over and not flip back.
Happening for anyone else? Worth lodging a community bug report or just sit it out? Or something else?
submitted by gojiraaltforreasons to googlehome [link] [comments]


2022.01.20 01:09 MBAMBA3 https://apnews.com/article/antony-blinken-jen-psaki-vladimir-putin-sergey-lavrov-congress-1df536e9a832830dc3bae2e89aef4116 Biden predicts Russia will invade Ukraine, warns Putin

https://apnews.com/article/antony-blinken-jen-psaki-vladimir-putin-sergey-lavrov-congress-1df536e9a832830dc3bae2e89aef4116 Biden predicts Russia will invade Ukraine, warns Putin submitted by MBAMBA3 to politics [link] [comments]


2022.01.20 01:09 Statyke A Runeslate (Magical Implement for a setting I'm working on) I made in PicoCAD!

A Runeslate (Magical Implement for a setting I'm working on) I made in PicoCAD! submitted by Statyke to low_poly [link] [comments]


2022.01.20 01:09 SeeYouNextNewsDay Send help.

Does anyone have any insight on how to get your crew to actually use recipe cards?
submitted by SeeYouNextNewsDay to Chipotle [link] [comments]


2022.01.20 01:09 gntlemanx [Xbox Series X/S] Looking for active, long term owners!

Hey everyone, Recruiting for next gen, Year 1, week 8. here are the rules, in reality, we just ask 3 things.

  1. No cheese
  2. Be active
  3. stream your games if your home team or playing CPU.
  4. http://daddyleagues.com/msl2022/rules
If your interested, come into our discord and @ commish https://discord.gg/x9ZVs6Ts
Open teams are:Panthers
Patriots
Colts
Giants
Vikings
Steelers
Bengals
submitted by gntlemanx to CFMmadden [link] [comments]


2022.01.20 01:09 steinbra27 What movie is the funniest?

View Poll
submitted by steinbra27 to badaboom [link] [comments]


2022.01.20 01:09 mewsl Cystic Fibrosis and Trikafta/Kaftria in Germany.

Hello friends. Guten tag :)
I have CF and live in Australia where Trikafta/Kaftrio is NOT available. I also have Germany citizenship. Unfortunately, I do not know a lot about Germany and CF care or the system there in general.
Can someone explain how care is there? What's the hospital like? How did YOU get access Trikafta/Kaftrio?
Any relevant information would be great. Thank you!
(My German is terrible so please reply in English)
submitted by mewsl to CysticFibrosis [link] [comments]


2022.01.20 01:09 alpha-rage ALWAYS film the police

ALWAYS film the police submitted by alpha-rage to MarchAgainstNazis [link] [comments]


2022.01.20 01:09 SoulOfaLiar On average, how long do you think about the words you're about to say before you say them?

submitted by SoulOfaLiar to AskReddit [link] [comments]


2022.01.20 01:09 Austie2004 [Gig] Night in the Life - January 20th 04:45 UTC

Players: 3-5 Duration: idk man Type: Day in the Life Preferred Roles: Any Difficulty: Day in the Life Scheduling: Impromptu (Requested)
The Plan:
A post appears on the local edgerunner forum:
Hey Edgerunners! I'm kinda bored right now, if someone would stream just them going around doing cool stuff to me I'd be willing to pay a small penny for your troubles!
Please Provide:

submitted by Austie2004 to NeonRed [link] [comments]


2022.01.20 01:09 Hey_Look_Listen_Link Any noteworthy "version differences" other than Mario 64 and Ocarina of Time?

Games on the N64 obviously didn't get patches or updates like modern games do, due to the fact that the console did not connect to what was a very lacking internet at the time. But some games did see certain changes made between different production runs of the game. I know this because I've heard/read a fair amount about the different "versions" of Mario 64 and Ocarina of Time.
If you bought a fresh copy of either game in the later years of the N64's lifespan, you'd likely get a copy that lacked certain glitches that were present when the games first released. This included (I believe for both games) some glitches that could be used by speedrunners to get lower completion times; this effectively made earlier copies preferable in some cases.
There were also some non-glitch changes made in the later versions, perhaps most notably, the removal of a Muslim prayer from Ocarina's Fire Temple music.
I no doubt have heard about the version differences in Mario 64 and Ocarina because the games are probably the two most discussed games on the system. But were there any other games that received interesting changes between versions? I'd love to know!
submitted by Hey_Look_Listen_Link to n64 [link] [comments]


2022.01.20 01:09 bexbexbobex Overwashing?

TLDR: can you wash a moissanite / gold jewelry too much?
I recently had to re-pierce one of my lobes. I have no idea why, because I wear my studs every single day and only take them out at night (I’m a side sleeper). I’ve also had my lobes pierced for 25 years. I know I should leave an earring in there for a few months until it heals a little more, but I can’t sleep with studs in, and studs are the only earrings I have. So I’ve been just cleaning my ear really well with Bio Septic every morning and night, and disinfecting my earrings with rubbing alcohol at the end of each day. It’s tempting to toss my solitaire and eternity band that I wear every day in there as well, but I don’t want to overwash my stones or the metal even. Is that even a thing?? Could I, in theory, wash my jewelry every single day if I wanted to? All of my jewelry is 10k or 14k rose gold, if that helps.
submitted by bexbexbobex to Moissanite [link] [comments]


2022.01.20 01:09 TupperwarePuppy First match in ages and I gotta say, it feels good to be on the winning team. All for the 6-4!

First match in ages and I gotta say, it feels good to be on the winning team. All for the 6-4! submitted by TupperwarePuppy to titanfall [link] [comments]


2022.01.20 01:09 Soft_Maximum_2388 Himalayan through his teeth…

He went up a mountain, after she went down.
submitted by Soft_Maximum_2388 to Punny [link] [comments]


2022.01.20 01:09 SolSatans SolSatans NFT Project

666 Satan's coming from the depths of the Solana Blockchain. Early adopters earn 5X passive income in the form of Solana airdrops. The active team is always there to help. Rapidly growing community on all platforms. Royalties go back to buying half the supply off the floor.
Check out SolSatans on all our platforms, our mint date is February 26th!

Our Website: https://www.solsatans.com/
Discord: https://discord.gg/kQtTvXQR2R
Twitter: https://twitter.com/SolSatans
TikTok: https://www.tiktok.com/@solsatans
Instagram: https://www.instagram.com/solsatans_/
submitted by SolSatans to SolanaNFT [link] [comments]


2022.01.20 01:09 owlwoodworks How to make a plate cut-out

How to make a plate cut-out There is one question wood workers always ask me, and that's "How do you make the plate cut-out".
https://preview.redd.it/rz7o2hwtjrc81.jpg?width=2048&format=pjpg&auto=webp&s=8f32630c0f6522d466723b586d247397b159af68
I have tried doing it a lot of different ways but I have landed on a system which I feel is both the easiest, and results in the best final product. Today I'm gonna do my best to explain my process.

First, figure out the height you want to make your plate cut-out. I find that 1 1/4" accommodates 99% of todays dinner plates. I like to set my combination square to this depth.
https://preview.redd.it/gbj4bg9pkrc81.jpg?width=4032&format=pjpg&auto=webp&s=2eb5ed9908d6bd18e92d5535ebec14958fe2fa76
Then determine the diameter of the plate you want to fit in the cut-out. A traditional dinner plate, just like this one, is 10 1/2".
https://preview.redd.it/0u96sgl2lrc81.jpg?width=4032&format=pjpg&auto=webp&s=47cb6e913d6c1c858c576524dac06764056d2869
Now put a straight cut bit in your router and measure from the edge of the bit to the edge of the router. As you can see, mine is 2 3/4".
https://preview.redd.it/7w2zoqj9lrc81.jpg?width=4032&format=pjpg&auto=webp&s=096957a83b2d65968d31b70c7d4031cf8698d9bf
Now that you know the diameter of the plate is 10 1/2" and the distance to the edge of the router face is 2 3/4" we can create our semi circle template. Double the router distance and add it to your plate diameter to get the diameter of your semi circle template. 10 1/2 + 2 x 2 3/4 = 16. So I then created a semi circle template with a diameter of 16".
https://preview.redd.it/umfmyvj9mrc81.jpg?width=4032&format=pjpg&auto=webp&s=92d5b842bb8f098f20be5b278d58c314020d8e58
Now, tape a sacrificial piece of wood to the front edge of your board. This does prevent chip out, but its main purpose is to give the router another surface to ride on, so make sure it's flush with the face you're working on. I've used this piece before which is why it's all cut up.
https://preview.redd.it/s8pz5pinmrc81.jpg?width=4032&format=pjpg&auto=webp&s=555263be7c70aae7f164d3d910af4ad4e0075d84
Now place the board on the corner of a table. Place the template on top. At this point, you have to decide how far you want the plate to slide under your board. I like 2"-3". In this case I went with 2". Take that measurement and add it to your router bit to edge distance from earlier. So for me it's 2" + 2 3/4" = 4 3/4". Now measure in that distance and put a line on your board. This is where the edge of your template goes. Obviously make sure it's centred.
https://preview.redd.it/qnv5o8ianrc81.jpg?width=4032&format=pjpg&auto=webp&s=9fac3ff204aab2120c9ddd5d784375e3b3202fc1
Now, clamp the jib and the board to the table on both sides. If you put the board on the corner of the table like I mentioned earlier, you will have an easier time clamping everything down.
https://preview.redd.it/uqufq0kenrc81.jpg?width=4032&format=pjpg&auto=webp&s=15e5d307b8f3f556534815dbfbb0c3b880fbb93a
Now that your piece is set up, it's time to set the router depth. Take the depth you want the cut-out to be from earlier, and set your router to that MINUS THE DEPTH OF ANY FEET YOU ARE PUTTING ON. Don't for get this part! Either take note of this measurement on you routers depth guage, or set it on you routers depth stop if its a plunge router.
https://preview.redd.it/noi8iatunrc81.jpg?width=4032&format=pjpg&auto=webp&s=cc1d660046daaa6edb40a1a1136a3a4cf1a859f7
Now, back the bit off so it's only cutting about 1/8". Push the router through any part of your sacrificial piece and begin to remove material from the cut out.
https://preview.redd.it/8fzoshxcorc81.jpg?width=4032&format=pjpg&auto=webp&s=0e140684f330e7e0ceb6acf793e780fa281807cc
Continue to do this 1/8" at a time.
https://preview.redd.it/vm9j4s6horc81.jpg?width=4032&format=pjpg&auto=webp&s=6ecb884f60c4437f5f14b2f2a10a6eea5cb531b6
Once you reach the final depth which you noted earlier, you are done!
https://preview.redd.it/bbl0biklorc81.jpg?width=4032&format=pjpg&auto=webp&s=8e0fb65531147f745712273b034d6090516482f0
Pop that sucker out of the clamps and finish your board as you usually do.
https://preview.redd.it/usu4w71torc81.jpg?width=2048&format=pjpg&auto=webp&s=dc208a98ef2f0bbae9ff6112201a5db562a356f9
A word of advice on this. Make sure your cut out isn't so deep that your remaining material is super weak. My boards are 2" thick and I use 7/16" feet so I've got over 1 1/4" of board left which is plenty.

Anyways, that is all I have. If you have any questions, drop me a comment and I'll try to get back to you promptly. If you're actively in the shop doing this and have a question you need answered promptly, I'm much more like to respond quick on instagram.

Hope this helps,
Luke
submitted by owlwoodworks to Cuttingboards [link] [comments]


2022.01.20 01:09 JD_Gaming_Boi For Sale: 1981 ETK A-series Group A rally car (more info in comments)

For Sale: 1981 ETK A-series Group A rally car (more info in comments)
https://preview.redd.it/w4om7zgdprc81.png?width=1797&format=png&auto=webp&s=eeb3e5132afeaeaa74cb51ab4ca185005650b95c
https://preview.redd.it/prvuwtgdprc81.png?width=1870&format=png&auto=webp&s=b0d7d12a6673de30331165a757f6f2f8c25dc55c
https://preview.redd.it/ynsc9ygdprc81.png?width=1795&format=png&auto=webp&s=d7684d231302854e3d84c1ced4454df20926aed1
https://preview.redd.it/jyyfutgdprc81.png?width=1633&format=png&auto=webp&s=e0e6e919fb2b6e3735ea58deed3d01a992298297
submitted by JD_Gaming_Boi to BeamNGRP [link] [comments]


2022.01.20 01:09 thatgirlofcourse [GIVEAWAY] I give away 4 MILL BELLS to 1 lucky winner, I will choose a winner when this post is 10 minutes old, just comment to enter!

submitted by thatgirlofcourse to NoFeeAC [link] [comments]


2022.01.20 01:09 rismaa96 Should I be looking elsewhere?

So I’ve recently started a new position at a well-known ad agency in my area working on a very large client. When I landed this job, I was absolutely overjoyed and happy to just get my foot in the door.
Here’s the thing…
I think I was so excited to get my foot in the door that I may have stepped into the wrong agency.
I’ve been here less than 6 months and I’m already seeing red flags. Talented employees leaving one after another, not so talented employees being promoted, a noteworthy amount of ego from my direct manager and overall just a disorganized sort of way of going about things.
And the icing on the cake is that I am starting to suspect that I might be getting underpaid.
Mind you, this is my first time working at an agency… so this could very well be “normal”, and having this agency on your resume is pretty much a stamp of approval to go anywhere else.
But I’m finding myself “casually” browsing open positions on LinkedIn…regularly.
So I guess my question would be, am I looking too deeply into things or are these legitimate red flags? And if they are red flags, worthy of considering a pivot … What does that look like when applying elsewhere with less than 6 months of experience and “already looking to leave”.
I haven’t made any decisions yet, but I’d love to hear from anyone who’s been in the industry for awhile, worked at an agency or has found themselves in a similar position, feeling the same way.
Thank you in advance for any insight or advice you’re willing to offer :)
submitted by rismaa96 to careerguidance [link] [comments]


2022.01.20 01:09 AnyLiterature1250 Anybody else see “aspiring milf” in bios?

Jesus I can’t comprehend how cringe this is. I’m doing my daily swiping and nothing is more obnoxious then seeing women portray themselves as a “future milf”. With their asses all out and their only demographic is horny desperate men. I never understood why you’d want to present yourself in that way other than for attention. Maybe its because I live in a college town where the only women around are girls in sororities. But seeing those types of bios immediately make me swipe right so fast. Never saw the appeal of being with someone who paints themselves that way.
submitted by AnyLiterature1250 to Tinder [link] [comments]


2022.01.20 01:09 uygayierifay Lachie Buyel, Lachie James Buyel, or Lachlanbuyel1@hotmail.com on PayPal is a scammer and will cancel his payments.

submitted by uygayierifay to Feetishh [link] [comments]


http://volosyjensk.ru